This is the free video MIG WELDING CARBON STEEL 1/4 THICK OUTSIDE CORNER DOWNHILL ROOT UPHILL COVER that can be downloaded, played and edit with our RedcoolMedia movie maker MovieStudio free video editor online and AudioStudio free audio editor online
Play, download and edit the free video MIG WELDING CARBON STEEL 1/4 THICK OUTSIDE CORNER DOWNHILL ROOT UPHILL COVER.
20 VOLTS 200 IPM .035” ER70S6
WELD PROCESS = GMAW, SHORT CIRCUIT MIG, GAS METAL ARC, BARE WIRE MIG
METAL TYPE = CARBON STEEL, COLD ROLLED STEEL, AISI 1010
THICKNESS = 1/4""
WELD TYPE = FILLET
JOINT TYPE =open butt OUTSIDE CORNER
POSITION = 3F PLATE downhill root
VOLTS = 20 volts
WIRE SPEED = 200 IPM
WIRE SIZE = .035"
POLARITY = DCEP
GAS FLOW = 20-25 CFH C25 GAS
CTWD = 3/8”-1/2"
FILLER METAL = ER70S6 .035"
ADDITIONAL SETTINGS =
A relatively short stickout aka contact to work distance CTWD of 3/8” to 1/2" makes a big difference.
The technique shown is a very slight side to side motion while keeping the arc on the front edge of the puddle while not far enough to shoot wire thru the gap.
Download, play and edit free videos and free audios from MIG WELDING CARBON STEEL 1/4 THICK OUTSIDE CORNER DOWNHILL ROOT UPHILL COVER using RedcoolMedia.net web apps